CODE: SEM-205
• Main dimensions, compatible w ith EN 733 (DIN 24255) norm. A total of 48 designed pumps available in the series.
• Single suction with closed impeller, and thrust balanced by means of counter-balancing holes and back wear rings, thus acquiring a dynamic balance.
• The pump and the motor have a standard connection to the common base plate with a flexible coupling. Maintenance and repair procedures are easily carried out since the pump fixtures can be removed with the volute body remaining intact.
• Use of extended coupling also enables the removal of the pump fixtures without moving the motor or the volute body.
• The series has been designed so that parts are easily replaced and standardized. The entire series is made up of only 6 bearings and 10 shaft types, thus simplifying spare parts procurement
TECHNICIAL SPECIFICATIONS
Suction Flange: DN 50… DN 400
Discharge Flange: DN 32…DN 350
Operating Pressure: 10 Bar
Casing Test Pressure: 13 Bar
Working Temperature: -25 – 130°C
Impeller Dia.: 160…500 mm ø
Speed Range: 1000 – 3600 rpm
Flow Range: 5 – 3500 m³ / h
Head Range: 4 – 105 m
FIELDS OF APPLICATIONS
• Water supply and booster stations.
• Irrigation, sprinkling, drainage processes.
• Tank systems.
• Hot-cold water circulation in cooling systems.
• Pumping of condensed water.
• Circulating water in pools.
• Industrial and domestic fluid pumping processes.
• Marine applications
