CODE: SHM-515

  • The SHM-515 Pump is a horizontal axis, radially split, ring section design multistage centrifugal pump of non-self priming type.
  • Impellers are between bearings, single entry, closed type and dynamically balanced. Impeller diameter will be corrected for optimal adherence to the required duty point.
  • For balancing the axial thrust, all impellers have back wear rings. For high pressure, balance disc application is used.
  • The pump series consists of 5 sizes. SHM 80, 100, 125, 150 and 200. Stages are from 2 up to max. 15 stages.
  • Pump and motor are fitted on a common base plate and connected to each other via flexible coupling.
  • Normally, discharge part is at motor side on the top and suction part is at dead end side on the left viewed from driver.
  • Suction and discharge nozzles may be a choice of three 90° positions. By special request, it is possible to put the suction nozzle at the motor side. In this arrangement pump and motor rotation must be counter clockwise.

TECHNICIAL SPECIFICATIONS

Suction Flange: DN 100… DN250 (PN 16)

Discharge Flange: DN 80…DN 200 (PN 40)

Working Pressure: 40 Bar (MAX)

Speed: 1450 -1750 rpm (for SHM 80 3000-3600 rpm)

Stage Number: 2-15

Flow Range: 30 – 800 m³ / h

Head Range: 30 – 500 m

FIELDS OF APPLICATIONS

  • Water supply systems,
  • Booster sets in high rise buildings and industry,
  • Water treatment,
  • Industrial washdown systems,
  • Fire extinguishing plants,
  • Boiler feed and condensate transfer,
  • Sanitary and cleaning installations,
  • For industrial applications and public services,
  • Water distribution services,
  • Industrial applications,
  • Shipbuilding, Mining, Power Stations, Filter Units,
  • Irrigation plants,
  • Central heating systems.